Home . Industrial . XMV660 Outdoor

XMV660 Outdoor

Outdoor Variable Speed Drive

2.3 kV - 13.8 kV

280 kW - 8.8 MW

XMV660 OUTDOOR is our most innovative medium-voltage variable-speed drive, with improved weather resistance, reliability and durability. It is designed to operate 24/7 in even the most demanding of environments. Our XMV660 drive represents a big step forward in terms of performance, by using thoroughly tested low-voltage modular technology and a robust multilevel configuration. It has been designed to the strictest safety standards, making it ideal for even the most demanding of industrial environments.










The XMV600 OUTDOOR is based on multilevel pulse width modulation (PWM) technology. The quasi-sinusoidal output voltage generated by the multilevel topology of H-bridge power modules connected in cascade supplies a sinusoidal current to the motor with low dV/dt without additional output filters, reducing spikes in voltage at the motor terminals, as both vibration and overheating. The power modules are connected to secondary independent units on the transformer with 18 to 54-pulse configuration. This transformer supplies very low THDi, a high level of electrical protection and a high power factor from low loads.

Range of voltages

The XMV660 OUTDOOR is available in a wide range of voltages, with high-quality power right across this range, along with maximum care for the motor and proven reliability – all without any compromises regarding safety.

Ventilation system

This innovative cyclonic-centrifuge ventilation system delivers a constant flow of clean air to the XMV660 drive. The heavier particles of sand and dust are separated out after the air enters the helical input section. The cyclones then free it of all impurities to supply a constant flow of clean air to the various compartments and cells of the transformer, all without any need for replaceable filters.

Robust Design

Our XMV660 OUTDOOR drive offers high performance under extreme weather conditions, thanks to its robust, sandstorm-resistant design.


Power Electronics has more than 30 years’ experience of producing starters and variable-speed drives for various industries, including the water, mining, oil and gas, metallurgy, paper and mechanical engineering sectors. Our wide range of products allows us to optimize motor functions in many different productive systems and in adverse environments, resulting in considerable energy savings. We are already world leaders in the supply of low- and medium-voltage equipment for solar thermal power plants.

Related news

Energy generation and self-consumption grow stronger in agriculture

30 August, 2019

At the beginning of 2017, the irrigation sector had already been making photovoltaic installations for direct supply of private pumps, mostly isolated, to replace or complement the use of generator sets for several years. At that time, Power Electronics  SD700SP drive was already the most installed. With the implementation of this solar pumping system it was possible to reduce operating costs and increase energy efficiency.

All news

We are here to help you

With 24/7 access to our technical assistance.
Please contact us for further help and information.

Contact us

This website uses cookies to offer you a better user experience. You can change your browser settings to automatically delete or block cookies. By continuing to use this website without changing the settings of your browser, you are implicitly accepting our use of cookies. See more